We start installing panels with a frame device from profiles

How to make a frame from profiles for mounting panels

Profileud is attached around the perimeter of the room to the floor and ceiling. It is important that the upper and lower profile coincide in level.

 The next stage: in the corners of the room we fix the vertical profiles of CD. At the top and bottom we attach them to the UD profiles with self -tapping screws. On the horizontal line from the floor to the ceiling approximately every 60cm, mark the mounting places of horizontal profiles CD, and on the vertical – also every 60cm – vertical profiles. At the place of intersection of profiles, we pre-fix the P-shaped suspensions. At the bottom of the profile, they are mounted with self -tapping screws to the lower UD profiles, on the sides – to the vertical profiles of CD.